tool path

Cross-entropy approach for tool path planning of PCB drill machines

求解PCB钻孔机刀具路径规划的交叉熵方法

互联网摘选

The tool path of NC simulation is the base and the key in NC simulation.

数控加工刀具轨迹生成是数控加工编程的基础和关键.

互联网摘选

Planning tool-path in the multi-coordinates machining curved face is elements and key of NC codes programming.

多坐标曲面加工的刀具轨迹规划是数控编程的基础和关键.

互联网摘选

Security Check of Tool Path Planning in Parallel Kinematic Machine Tools

并联机床轨迹规划的数据安全校验

互联网摘选

On this basis, using UG/ CAM NC programming module optimize the processing path, tool path and cutting mode of processing parameters. The gouges between cutting tools and the part are disappeared.

在此基础上，利用UG/CAM模块进行数控编程，优化了加工路线、刀具轨迹、切削方式等工艺参数，通过刀轨检查及时地发现刀具跟零件之间的过切和欠切。

互联网摘选

Research and Implementation of Finish Tool Path Generation with Section Plane Method

截平面法加工刀轨算法的研究与实现

互联网摘选

Voronoi diagram is a commonly used algorithm for contour-parallel tool path generation.

Voronoi图是环切刀位轨迹生成的一种常用算法.

互联网摘选

Introduced a method of NC machining tool-path generation based on scattered data model.

介绍了一种基于离散数据模型的数控加工刀具轨迹生成的方法.

互联网摘选

A Non-interference Tool Path Generation Algorithm for Curved Surface Numerical Control Processing

曲面五轴无干涉立铣刀刀位轨迹的计算方法一种无干涉曲面刀具路径生成算法

互联网摘选

The tool path mode and the feed mode in numerical control milling are introduced.

介绍了三轴数控铣削加工的走刀方式和进刀方式.

网络文摘精选

A tool path generation method is presented for NC machining based on vector analysis and NURBS.

描述了基于矢量分析和NURBS的数控加工轨迹设计方法.

互联网摘选

Research and Implementation for Tool Path Generation of Free Form Surfaces Machining

曲面加工刀具轨迹生成技术的研究与实现

互联网摘选

Cutter contact tool path is mapped from parametric region to triangular meshes by means of conformal map and its reverse map.

根据协调映射求解得到其逆映射，将刀触点轨迹由参数域逆映射回网格曲面。

互联网摘选

Adaptive algorithm for tool path in NC machining of free form surface

自由曲面数控加工刀具路径的自适应算法

互联网摘选

Algorithm of Non-interference Tool Path Planning of Auto Lamp Mold Side Pattern

车灯模具侧花纹无干涉刀具路径规划算法

互联网摘选

In NC programming of pocketing operation with contour parallel strategy, the reasonable positioning of the pre drilled holes and tool path planing remarkably affect programming effectiveness and cutting efficiency.

在运用环切方式进行型腔类零件的分层加工时，预钻孔位置和刀具运动轨迹规划直接影响编程的繁简及切削效率。

互联网摘选

The iso-scallops tool-path generation method base on drum cutter of five-axis flank milling is proposed.

发展了基于等残留高度的 鼓形 刀五坐标侧铣刀具轨迹计算方法.

互联网摘选

The interference-free tool path planning is given.

给出了平头铣刀的无干涉路径规划.

互联网摘选

Finally, the tool path is optimized for the interference avoidance.

最后对刀具路径作了无干涉工艺优化。

互联网摘选

Select line shape with tool Path.

选择与刀具路径线的形状。

互联网摘选

Experienced Tool path programer for 5 axis milling machine. Full or par time.

要求有5年以上工作经验,做五轴机器的编程工作.

互联网摘选

Forward Tool Path Modification for the Regulation of Cutting Engagement tangential feed mechanism

对于切削进给的前向刀具路径修正研究切向进给[进刀]机构

互联网摘选

One is planning the tool path and generating the G-code file based on the UG-CAM software considering the actual grinding technics, then the G-code file was transferred to the required format file that can be run in the robot by the developing software in the paper.

其一是以UG为平台、研磨工艺特点为背景，采用UG-CAM进行研磨路径的规划，并开发相关软件将所生成的G代码转化为机器人识别代码。

互联网摘选

Tool Path: Specifies the command line name of the linker tool.

工具路径: 指定链接器工具的命令行名称.

互联网摘选

A method for generating interference free tool path for NC machining surfaces is suggested.

提出一种数控加工中曲面实时插补无干涉刀轨生成方法.

互联网摘选

Taking the five-axis NC machining workflow of centrifugal compressor impeller as the main thread and tool path scheduling algorithm of five-axis machining, post-processing algorithm for special type of five-axis machine tool and error analysis and compensation algorithm as the core contents are studied.

本文从离心压气机叶轮的五轴数控加工流程入手，主要研究了叶轮五轴加工刀具路径规划、特殊类型五轴机床后处理以及误差分析与补偿等技术内容。

互联网摘选

Algorithm of Tool Path Generation in Rough Plunge Tooling Based on Scallop Height Restriction

基于残留高度约束的插刀粗加工刀位轨迹生成算法

互联网摘选

In this paper to the 2-dimensions arbitrarily the shape flat surface carries on tool path generation, the adoption have to of closing wreath carry on the description to the slot form boundary, use offset curves method make tool path generation.

本论文对二维任意形状平面区域进行刀具轨迹的自动生成，采用有向的封闭环对边界进行描述，通过构造等距线法求解刀具轨迹。

互联网摘选

The key technical research in interference-free tool path of torus cutter

圆角刀无干涉刀具轨迹关键技术研究

互联网摘选

The theoretical error in five axis NC machining, which is resulted from approximating the perfect continuous tool path with discrete linear segments, is strictly analyzed.

对五坐标曲面加工中由离散线性运动逼近理想刀具轨迹所引起的理论加工误差进行了较严格的分析。

互联网摘选